Double Axles Total Station Surveying Instrument 5000m Single Prism

Total Station Surveying Instrument High Measurement Accuracy 2″ 5000m Single Prism

Model: RTS112S

Features:

◎ New Stent Design
◎ New Fast Digital Rangefinder Head
◎ 32-bit Microprocessor
◎ Optimize the software job flow
◎ Long Distance non prism (Rseries)
◎ Absolute Coding System
◎ USB Port Fast Communication
◎ Big Capacity Storage
◎ Large capacity Lithium battery
◎ Bluetooth communication function

◎ With line calculation, traverse adjustment function

Specifications:

Highlights:

1 Dual OLED screen
2 SD Card, Bluetooth
3 USB, RS232
4 (x2) Batteries with over 26 hours of working time
5 Onboard application programs
 

Other Models Available:

RTS112SL
RTS110SR5
RTS112SR6
RTS110SR10
RTS110SR8

Total Station Accessories:

1. Instrument
2. Batteries (x2)
3. Battery charger
4. Communication cable (D30-2200)
5. Reflective sheets 30×30 mm (x4)
6. Reflective sheet 60×60 mm (x1)
7. Tool kit
8. Rain protection bag
9. Instruction manual
10. Carrying case

Battery in Total Station

1. Mounting the battery

Insert the battery by aligning the battery pack’s tenon with the notch in the instrument, press the battery clamp and push the top of the battery pack until you hear a click.

2. Removing the battery

Press the battery clamp and remove the battery pack by pulling it toward you.

3. Battery Indicator

Battery power display indicates the power condition. You should recharge or replace the battery when you hear the continue buzz. Please turn off in the normal way in order to save the data. Please find the battery operating time on specifications.

Recharge in Total Station

1. Plug the charger on 100-240VAC (50-60Hz) power supply, the red lamp lighting.
2. When recharge is complete, the light become green. Normally, it will take about 3~4 hours.

Caution: For indoor use only.

Note:

1. The new battery (or not the used for long time) need to recharge and discharge for several times, the battery could become the good performance for using. Please recharge more than 10 hours.
2. Please prolong charge 1~2 hours after green lamp lighting to reach the best performance.
3. Lamp situation:

Red lamp lighting--charging;

Green lamp lighting--charge complete

Red lamp flash—waiting, not connecting or battery defective.

4. If the red lamp flashes when plug the charger, please remove the charger and wait a minute to plug it again.

Package: Hard Carrying Case

Detailed Pictures