-
Surveying Reflector Prism
-
Survey Mini Prism
-
360 Degree Prism
-
Total Station Prism
-
Prism Pole Bipod
-
Carbon Fibre Telescopic Pole
-
Telescopic Levelling Staff
-
Tribrach Adaptor
-
Instrument Tripods
-
Total Station Batteries
-
Total Station Battery Charger
-
Total Station Cable
-
Total Station Accessories
-
Surveying Instrument
470 MHz RTK Accessory Total Station Cable QT450ETH CHC GPS Screw Antenna
Model | QT450ETH | Color | Black |
---|---|---|---|
Working Frequency | 410~470MHz | Resistance | 50OHMS |
Gain | 4DBI | Standing Wave Ratio | ≤1.5 |
Antenna Interface | TNC-J Male | Length | 18cm |
Application | Antenna For GPS | Condition | New |
High Light | RTK Total Station Cable,CHC Total Station Cable,QT450ETH |
410~470 MHz RTK GPS Screw Antenna QT450ETH for South Hi-Target CHC GNSS Accessories
Model: QT450ETH
Specifications:
Model | QT450A |
Color | Black |
Working frequency | 410~470MHz |
Resistance | 50OHMS |
Gain | 4DBI |
Standing Wave Ratio | ≤1.5 |
Antenna Interface | TNC-J male |
Length | 18cm |
Application | Antenna for GPS |
This antenna can be used for the following Brands GNSS:
Hi-Target
South
CHC
GNSS Antenna
A GNSS or GPS antenna is a device designed to receive and amplify the radio signals transmitted on specific frequencies by GNSS satellites and convert them to an electronic signal for use by a GNSS or GPS receiver. The output of the GNSS or GPS antenna is fed into a GNSS or GPS receiver that can compute the position.
Detailed Pictures: