Prism Survey Tribrach Adaptor Torsional Stiffness Circular Bubble GDF112 GNSS

Leica GDF112-1 Tribrach with Optical Plummet For Surveying Total Station Prism set

Model: GDF112-1

Specifications:

Introduction:

Tribrach with Optical Plummet The tribrach and optical plummet are of robust construction and suitable for long period exposure in all environments. This makes the GDF112-1 ideal for GNSS and backsights and control points. Torsional stiffness <3", weight 840 grams (1.48 lb)

Highlights:

High accuracy, maintenance free tribrach. Individually tested. Suitable for all high angular accuracy requirements.

All Leica original tribrachs comply with the strict specifications and quality standards of Leica Geosystems. Your choice should ideally be made according to your individual accuracy requirements.

These tribrachs are suitable for non-motorised TPS instruments with angle accuracy from 5" to 7" and GNSS antenna stations as well as backsights and control points.

The torsional rigidity (or hysteresis) of the Professional 3000 Series tribrachs amounts to a maximum of 3" (1.0mgon).

The accuracy with which a tribrach returns to its starting position once the instrument has stopped, is called torsional rigidity or hysteresis. This hysteresis is the relative movement between the top plate and the base plate of a tribrach that occurs through the rotation of a TPS instrument. The hysteresis has direct influence on the angular accuracy of the instrument – and that speaks for the original. To optimize the hysteresis as Leica Geosystems has done is complex and calls for the highest precision: a movement of the top plate to the base plate of 0.3µm corresponds to an angle error of 1". Especially motorized instruments with their high acceleration and brake power require tribrachs with very high torsional rigidity.

The foot screws are maintenance free and have a larger diameter. This allows for fine adjustments, even when wearing work gloves under difficult environmental conditions.