-
Surveying Reflector Prism
-
Survey Mini Prism
-
360 Degree Prism
-
Total Station Prism
-
Prism Pole Bipod
-
Carbon Fibre Telescopic Pole
-
Telescopic Levelling Staff
-
Tribrach Adaptor
-
Instrument Tripods
-
Total Station Batteries
-
Total Station Battery Charger
-
Total Station Cable
-
Total Station Accessories
-
Surveying Instrument
GMP111 Mini Prism Pole Surveying 2.0mm Range Pole Surveying
Model | GMP111-0 | Prism | 5 Arcsec; Copper Coated |
---|---|---|---|
Prism Constant | 0.0mm | Centering Accuracy | 2.0mm |
Range | 2000m | Prism Holder | 8’ Round Bubble Level |
Prism Holder Material | Plastic | Centering Rod | 4 Pcs |
Rod Material | Aluminium | Rod Length | 30cm |
Used For | Leica Total Station | Catagory | Total Station Accessories |
High Light | GMP111 prism pole surveying,2.0mm prism pole surveying,2.0mm range pole surveying |
Leica GMP111-0 Survey Mini Reflector Prism Set with 4 Poles for Leica Total Station
Model: GMP111-0
Specifications:
Model | GMP111-0 |
Prism Constant | 0.0mm |
Prism | 5 Arcsec; Copper Coated |
Prism Material | Metal canister |
Centering Accuracy | 2.0mm |
Range: | 2000m (IR) |
Prism Holder | 8’ Round Bubble Level |
Prism Holder Material | Plastic |
Centering Rod | 4 pcs |
Rod Material | Aluminum |
Rod Length | 30cm |
Used For | Leica Total Station |
Introduction:
Leica GMP111-0 mini reflector prism with bubble, pole and spike set.
The GMP111-0 offers high positional accuracy due to its small size. It is mounted in a polymer holder with 1/4" thread fittings, has a built-in leveling bubble and is supplied with the GLS115 four-section pole and attachable spike (1/4" thread).
This setup allows a point to be measured with very high precision.
Box Contents:
- 1x Prism
- 4x Poles (screw-on aluminium, permitting five prism heights - 10, 40, 70, 100 & 130cm
- 1x Spike
Highlights:
Mini prism mounted in polymer holder with 1/4" thread fittings. Includes circular bubble, GLS115 four-section pole and point. Leica 0-prism constant, max. IR range of 2000m (7000ft).
Prism Holder Accuracy
Prism accuracy is determined by the physical location of the prism in its canister and then to the prism holder. Certificates of compliance are available upon request. Leosurve prism accuracy is 1 mm or less.
Survey Prism Offsets
Some Surveying Prisms have an offset due to the fact that the transmitted beam from the EDM takes longer to enter and exit the prism. The longer time translates to a longer distance measured. The distance is corrected by using an 'offset' and/or positioning the prism in relationship to the plumb line of the prism holder. Common offsets are 0, -17.5 mm, -30 mm, -34 mm, and -40 mm. The offset is determined by multiplying the height of the prism against the refractive index of the glass used.
Prism Dimension
Item Pictures